Free delivery for order over $200


In Stock

Bostitch BULLDOG 18-Gauge Pneumatic Brad Nailer

7 Reviews
  • Kit includes: brad nailer, 1/4-in air fitting and carrying case
  • Drives 18 gauge nails from 5/8-in to 2-in
  • Tool-free adjustable exhaust cap conveniently directs exhaust away from the user


For trim work, cabinet finishing and paneling installation, this Bostitch clip head brad pneumatic nailer is the tool for the job. The 100-fastener magazine capacity accommodates adhesive strip-collation nails up to 2-in long, and the adjustable guide allows you to quickly and conveniently set the desired depth. No tools are required to direct the adjustable exhaust cap away from your face, increasing your comfort while you work. The no-mar tip helps protect delicate work surfaces, and the lightweight design allows you to work for longer durations with reduced fatigue. An included soft case keeps the tool protected during transport and storage.
  • Kit includes: brad nailer, 1/4-in air fitting and carrying case
  • Drives 18 gauge nails from 5/8-in to 2-in
  • Tool-free adjustable exhaust cap conveniently directs exhaust away from the user
  • Adjustable depth guide sets nails to desired depths quickly and conveniently
  • No-mar tip helps to protect work surface
  • Tool-free adjustable exhaust cap increases your comfort
  • 7-year limited warranty gives you peace of mind
  • Included soft case protects the tool during transport and storage
Weight 4.72 lbs
Dimensions 24 × 2.5 × 42 in

Latest reviews

  1. Sue

    I had the bostich PN1664FN and it was such junk! You could maybe get one nail out before it jammed, and getting the jammed nails out was so difficult. I bought this nailer and was worried since it was another bostich, but right away I knew it was so much better just by how you place the nails in the gun. I could tell that if it did jam at least it would be easy to get the nails out. Didn’t need to worry about that though since I did 2 rooms and not once did I have any issues. Extremely satisfied.

  2. oldHorse

    Bought this nailer with 6 gallon pancake compressor as a package. It has been 2 years of good contributions to my hobby woodworking. One time even loaned to a handyman to do a floor baseboard. Always put the brads flush. No need to fix with hammer. Also own Makita, Hitachi mailers of 23ga, 18ga(this one) and 16 ga. They are all good. But the Bostitch 18 gauge is the one get used the most. The Bostitch oil free one is my next purchase. Buying tools is definitely addictive.

  3. Nancy

    Came out of the case ready to use. Just load brads, attach to air compressor and start nailing. So easy to use. Great value.Love it.

  4. Julio

    Small but perfect for the job. Easy to use and store with the case it comes with. Recommended for home owners.

  5. Jason

    Great nailer! I have used mine a lot around my house for over a month on needed to do projects and I am more than pleased with the results. 100% reliable! Easy to adjust settings, lightweight, easy to load, super easy to operate.

  6. Kyle

    This nail gun works very well and takes both nails and staples. Only thing better would be if it came with some oil like many other nail guns do.

  7. EricW

    I researched various nailers for days. After determining the gauge I needed, i settled on this unit. I have used it to repair furniture and it has performed flawlessly! Easy to load, easy to line up your shots. Hasn’t damaged nor left any marks on the furniture. I highly recommend this nailer for the homeowner. I read other reviews where professionals recommend it, too!

Write a review
Write a review

Your email address will not be published. Required fields are marked *


o3waterworks o3waterworks Ozone Enhanced Oxygen Spray Bottle

(7 Reviews)
  • Instantly generates aqueous ozone, a proven sanitizer, using only tap water- simply spray it to conveniently clean, deodorize and sanitize any surface that can get wet
  • Ultimate surface cleaner for kitchen and bathroom, pacifiers, and baby toys, can extend the life of foods in refrigerator
  • Shown to achieve a 99.9% reduction of a commercial testing surrogate for the Human Coronavirus SARS-CoV-2, and other bacteria and viruses (see 'Warranty Guide')

CRAFTSMAN 2000 Series 26-in W x 19.75-in H 5-Drawer Steel Tool Chest (Red)

(47 Reviews)
  • Proudly Made in the USA with Global Materials in Sedalia, Missouri
  • BUILT TO LAST: 18-20 gauge double wall construction
  • FULL EXTENSION DRAWER SLIDES: Support 75-lbs of product

WORX Power Share 20-volt / 20 Lithium Ion (li-ion) Air Inflator (Power Source: Battery)

(10 Reviews)
  • [HIGH-PRESSURE INFLATION] Provides up to 150 PSI, perfect for inflating tires, sports balls and other small inflatables
  • [DIGITAL LED GAUGE] Displays accurate tire pressure with the ability to preset desired PSI
  • [SHARE BATTERIES, SAVE MONEY] Worx Power Share is compatible with all Worx 20V and 40V tools, outdoor power and lifestyle products

CRAFTSMAN 8-Gallons 3.5-HP Corded Wet/Dry Shop Vacuum with Accessories Included

(24 Reviews)
  • 8 Gallon rugged polypropylene tank
  • Powerful 3.5 peak HP† motor
  • Complete vacuum organization with on-board hose, cord and accessory storage

DEWALT Auto Darkening Variable Shade Yellow Welding Helmet

(0 Reviews)
  • LIGHTNING FAST - 4 lightning fast arc sensors engage and darken the filter in 1/15000 second
  • PANORAMIC VIEWING - Additional DIN 5 side lenses allow a wide, 20.4 square inch panoramic view while working
  • SHADE CONTROL - Independent shade control allows you to fine-tune the DIN level according to preference or welding process

SKIL PWR CORE 20 5 Amp-Hour; Lithium Power Tool Battery

(5 Reviews)
  • LONGER RUN TIME AND BATTERY LIFE - The PWR CORE 20™ Lithium Battery has an innovative temperature management system to keep the battery cool and powering on through your project
  • ALWAYS KNOW CHARGE STATUS - Green LEDs show status, so you always know how much charge is left
  • POWER UP 20V TOOLS - Pairs with any SKIL 20V product

Kobalt Eva Foam 5pc Tool Storage Drawer Liner

(3 Reviews)
  • EVA foam tray inserts help organize your tools by drive size and tool type
  • Fitted cutouts help hold your tools in place
  • Contrasting colors help identify missing tools in a quick glance and printed markings indicate which tool belongs in each opening

Back to Top
Product has been added to your cart