Free delivery for order over $200


In Stock

Jorgensen 36-in Bar Clamp

24 Reviews
  • Used for woodworking or metalworking projects that call for a deeper reach
  • 36in maximum opening and 7in reach
  • Built with cast-iron heads and rust-resistant bars


When a woodworking or metalworking project calls for a deeper reach, the Jorgensen 36″ deep reach steel bar clamp delivers. With a 36″ maximum opening and 7″ reach, this bar clamp is a must-have at any contractor jobsite or home woodworking shop. Built with cast-iron heads and rust-resistant bars, the Jorgensen 36″ deep reach steel bar clamp also features a comfort-grip handle that prevents fatigue from repeat use. The perfect tool for dyers, hobbyists, carpenters, and woodworkers, this bar clamp has a protected polyvinyl handle and copper-plated screw and swivel end. As with all Pony Jorgensen tools, the Jorgensen 36″ deep reach steel bar clamp is made with high-quality steel and has 1,200 pounds of clamping pressure.
  • Used for woodworking or metalworking projects that call for a deeper reach
  • 36in maximum opening and 7in reach
  • Built with cast-iron heads and rust-resistant bars
  • Features a comfort-grip handle that prevents fatigue from repeat use
Weight 11.77 lbs
Dimensions 42.36 × 10.47 × 1.89 in

Latest reviews

  1. WorksInTheory

    [This review was collected as part of a promotion.] I decide to try these as alternative to my usual Bessey’s… and yes of course, Harbor Freights as well. It’s the perfect value to quality ratio. Significantly better than HF (of course you’d expect it) but lighter weight than the Bessey’s. Actually I like that. I don’t think I lose any clamp pressure – at least got what I need. The throat reach is great. But because it’s lighter, easier to handle from getting it off the clamp rack to after you have everything on your piece (I tend to use too many clamps) the piece isn’t too awkward or heavy to maneuver. Like I said the right balance everything without giving up the quality and features.

  2. Old Woodworker

    I have been using these clamps for 10+ years and they have never let me down. They are easy to use and store.

  3. Baldwin

    [This review was collected as part of a promotion.] When I’m doing a large glue up, the Jorgensen Deep-Reach Throat Bar clamp makes the project dry with no warping. The clamp spreads the pressure load enough to not leave impressions in the hardwood. If you set the piece on the bar, then clamp, you will find the same benefit I do. The clamp also allows for me to adjust the pressure to the micro level. Too much pressure squeezes too much glue out and can compress the wood grains. This clamp allows me to incrementally increase or decrease the load to the level I need to create professional grade results.

  4. tdn01

    I’ve used a variety of Jorgensen clamps over the years and have yet to any regrets spending a little extra to purchase them. The F-clamps are very sturdy and have excellent clamping power. The threads are very clean and so the applying clamping pressure is very smooth allowing gradual clamping pressure to be applied. I have had trouble with the pads staying centered on the shaft when applying clamping pressure with lower quality clamps, but have never had this issue with Jorgensen clamps.

  5. Dave1951

    I inherited about 30 Jorgensen bar and wood clamps in 1976. They were only about 15 years old then. Since then, in my woodworking and cabinetry business, I have bought and used many makes of clamps. My father had told me to always use more clamps than you think you need, never over-tighten or abuse a clamp, and you can always count on Jorgensen to be your go-to clamp of choice. He was right on all counts. Since 1976 I have bought at least 100 more Jorgensen clamps of various types and I plan on buying many more. The newer clamps with the molded handles are much easier to use than my old trusted wooden handled ones, so I give kudos to the engineers at Jorgensen for making a great thing better. Also, the screw and bite-plates mechanism is perfect. All other manufacturers have a lot to learn from Jorgensen.

  6. Mad Dog

    [This review was collected as part of a promotion.] I used a bunch of these when bending and gluing wood for a fly fishing net. They are compact so you can use them close together in curves. The hand screw makes their performance better than a squeeze clamp. I own several lengths of these and have had them for many years and still perform like new. I also use them for non gluing applications as an extra hand due to their size. These are a must have clamp.

  7. CN68

    This is a heavy duty, deep reach clamp. The pads are significantly larger than the smaller Jorgensen clamps, so the accessory pads Jorgensen offers won’t work. The tolerances were a bit tight on one of two I received, and I had to due minor fitting to make it slide along its length. Overall though, it works very well.

  8. Gary

    [This review was collected as part of a promotion.] I have been using Jorgensen clamps for decades. They continue to serve me very well. Even though I mostly use the smaller clamps, this is my go to for when I need extra pressure or reach. These really exert a lot of force when needed. I expect them to be working beautifully long after I am no longer.

  9. Woodturnersjournal

    [This review was collected as part of a promotion.] I bought these clamps because I heard about them from a family member. I was sick of these cheap H.F. clamps I had that kept bending on me. After getting these bar clamps, they did not disappoint. They are heavy duty and I can clamp down with any fear of them bowing. Truly amazing clamps

  10. Vols

    actually bought 2 of the 9″ throated ones to use for irregular concrete forms. They worked great to hold 2×4 outside bracing of the wall forms. Rock solid.

    Very Pleased. Built like a tank, should last generations, lol.

  11. Sawdust creator

    [This review was collected as part of a promotion.] Have clamps in multiple depths, 5”, 7” and 9” – never had issue slipping, twisting or moving once tightened…as with other competitors. Worth the money. Only problem (for PONY) is so well made may never need to replace em.

  12. GHemminger

    This clamp can be used for many situations, but it is especially useful when a long reach is needed. Very few clamps have such a long reach. It is well made, and remains stable despite its long arms.

  13. Irishpiper

    The times I have used this clamp is beyond tabulation. Assemble or securing to or on a bench is an everyday necessity for me. Deep throat clamps- how did I manage without them? Clumsily.

  14. Madman64

    bought a couple of these to be able to clamp further down into a project I was gluing so I could get better adhesion. Clamp was easy to use and did what I wanted.

  15. Anonymous

    [This review was collected as part of a promotion.] I purchased this maybe a month or 2 ago and it puts all my other clamps to shame, the deeper throat is so helpful. I will definitely be purchasing more of these!

  16. Chooch

    [This review was collected as part of a promotion.] I have the Deep -reach throat Bar Clamp and the are so handy in my shop that I use them all the time . They are well made and super handy to have in your shop.

  17. CbPb

    [This review was collected as part of a promotion.] I have lots of pony clams but sometimes I need the clamp to reach further in to make the grab. The extra depth of this clamp has gotten me moving many times.

  18. FreedomWW

    I’ve been using these for a couple years. I had other brands that have broken, hard to turn, and don’t slide like these. They’ve been replaced with Jorgenson

  19. hockeypfef

    [This review was collected as part of a promotion.] I’ve been eyeing this clamps for months and finally pulled the plug. This clamp gets the job done and I will be purchasing some more real soon.

  20. Hilly

    I have used Jorgensen bar clamps for years! They continue to be my first go to clamps. They are consistent and never disappoint.

  21. Howie

    [This review was collected as part of a promotion.] I have a dozen or more bar clamps. The best feature is the non-slip grip. You can really clamp down tightly without much effort.

  22. Cody J

    [This review was collected as part of a promotion.] This the best clamp I have in my work shop. I have cheap clamp that will work, but this one goes above expectation each time

  23. Jewell

    [This review was collected as part of a promotion.] I use this primarily to hold large log bowl blanks so i can trim them round with a chainsaw before i put them on the lathe

  24. DIY54

    [This review was collected as part of a promotion.] So far this has been the best bar clamp in my shop, The deep throat adds a lot of versatility to solving clamping issues

Write a review
Write a review

Your email address will not be published. Required fields are marked *


o3waterworks o3waterworks Ozone Enhanced Oxygen Spray Bottle

(7 Reviews)
  • Instantly generates aqueous ozone, a proven sanitizer, using only tap water- simply spray it to conveniently clean, deodorize and sanitize any surface that can get wet
  • Ultimate surface cleaner for kitchen and bathroom, pacifiers, and baby toys, can extend the life of foods in refrigerator
  • Shown to achieve a 99.9% reduction of a commercial testing surrogate for the Human Coronavirus SARS-CoV-2, and other bacteria and viruses (see 'Warranty Guide')

CRAFTSMAN 2000 Series 26-in W x 19.75-in H 5-Drawer Steel Tool Chest (Red)

(47 Reviews)
  • Proudly Made in the USA with Global Materials in Sedalia, Missouri
  • BUILT TO LAST: 18-20 gauge double wall construction
  • FULL EXTENSION DRAWER SLIDES: Support 75-lbs of product

WORX Power Share 20-volt / 20 Lithium Ion (li-ion) Air Inflator (Power Source: Battery)

(10 Reviews)
  • [HIGH-PRESSURE INFLATION] Provides up to 150 PSI, perfect for inflating tires, sports balls and other small inflatables
  • [DIGITAL LED GAUGE] Displays accurate tire pressure with the ability to preset desired PSI
  • [SHARE BATTERIES, SAVE MONEY] Worx Power Share is compatible with all Worx 20V and 40V tools, outdoor power and lifestyle products

CRAFTSMAN 8-Gallons 3.5-HP Corded Wet/Dry Shop Vacuum with Accessories Included

(24 Reviews)
  • 8 Gallon rugged polypropylene tank
  • Powerful 3.5 peak HP† motor
  • Complete vacuum organization with on-board hose, cord and accessory storage

DEWALT Auto Darkening Variable Shade Yellow Welding Helmet

(0 Reviews)
  • LIGHTNING FAST - 4 lightning fast arc sensors engage and darken the filter in 1/15000 second
  • PANORAMIC VIEWING - Additional DIN 5 side lenses allow a wide, 20.4 square inch panoramic view while working
  • SHADE CONTROL - Independent shade control allows you to fine-tune the DIN level according to preference or welding process

SKIL PWR CORE 20 5 Amp-Hour; Lithium Power Tool Battery

(5 Reviews)
  • LONGER RUN TIME AND BATTERY LIFE - The PWR CORE 20™ Lithium Battery has an innovative temperature management system to keep the battery cool and powering on through your project
  • ALWAYS KNOW CHARGE STATUS - Green LEDs show status, so you always know how much charge is left
  • POWER UP 20V TOOLS - Pairs with any SKIL 20V product

Kobalt Eva Foam 5pc Tool Storage Drawer Liner

(3 Reviews)
  • EVA foam tray inserts help organize your tools by drive size and tool type
  • Fitted cutouts help hold your tools in place
  • Contrasting colors help identify missing tools in a quick glance and printed markings indicate which tool belongs in each opening

Back to Top
Product has been added to your cart