Free delivery for order over $200


In Stock

Metabo HPT 3-in x 0.12-in 30 Degree Collated Framing Nails (2500-Per Box)

13 Reviews
  • 3 In. x 0.120 ring shank
  • Fastener is hot dipped galvanized
  • Nails are 35 degree


The 15137 is a clipped Head, paper strip collated, hot dipped galvanized Framing nail.
  • 3 In. x 0.120 ring shank
  • Fastener is hot dipped galvanized
  • Nails are 35 degree
  • Fasteners are made of low carbon steel
Weight 23.35 lbs
Dimensions 8.8 × 11.1 × 3.4 in

Latest reviews

  1. Justin

    These are the worst nails I’ve ever used. I was in a pinch for galvanized nails for a shed sheeting project I had and these were in stock. the collation was inconsistent, and the paper was the cheapest masking tape I think they could find. Every time I pulled a new rack of nails out of the box, several would just fall out of the rack. others I had to trim the paper because it was so long, or because nails fell out. Then the paper kept jamming in my gun because it would ball up. I usually had to pull the rack out with about 5-10 nails and put a nee one in. Even with a full rack in, the nails were bunching in the slide under the pressure of the spring. Maybe I just got a defective pack, but I’ve been running since and Griprite nails with no problem through my Senco nailer for years with no problems. The colliation of the racks are right and the paper is quality. out of a dozen racks used, I had at least 4 racks worth of wasted nails and time.

  2. LisaLee

    We used these along with the framing gun for our home improvement project. Worked perfectly. We bought a huge box to ensure we had enough for our summer projects

  3. Andy

    I shoot these through my 20V dewalt framing nailer and they shoot as good as the paslode nails do at a much better price. Will definitely be purchasing from this point on.

  4. DMitch

    Used these in a Dewalt cordless framing nailer without a single issue.

  5. Eddie

    They are framing nails for a framing gun. They work. They are held together with paper, not plastic, so they are more sensitive to weather. I bought them because they fit my framing gun. So far no problems.

  6. Rick

    These nails are very strong and they held the materials tightly.

  7. Bulldog

    I use a 3 in 1 framing nailer under 100 psi to frame rough cut hardwood. 100 psi will sink these framing nails into a recessed position.

  8. Callen5986

    The Metabo HPT-3 nails hardly ever jam. They have made my life a little easier.

  9. ghost

    I appreciate the quality of the nails and how well they fire through the gun….absolutely no misfires or jams….very pleased

  10. StevenW1980

    The work well in Paslode air gun and dewalt battery nailer. They are less expensive than other nails and use them on most jobs

  11. Bert

    Nails worked out great for my nail gun. He was awesome having the correct product to complete the job. Thank you, !

  12. travis

    Use them all day for 3 days no issue with them jamming or anything else worked perfect

  13. Loren

    Fit gun good. Paper didnt break up early and nails were proper gauge for what i built.

Write a review
Write a review

Your email address will not be published. Required fields are marked *


Metabo HPT 1-1/2-in x 0.148-in 30 Degree Electro-Galvanized Smooth Joist Hanger Nails (1000-Per Box)

(5 Reviews)
  • TYPE: Heat Treated Steel Paper Tape Strap Tite Nail
  • APPLICATION: Great for various types of pre-punched hole metal connectors to wood
  • COUNT: 1,000 per box

Power Pro #10 x 3-in Epoxy Exterior Wood Screws (800-Per Box)

(22 Reviews)
  • 800 pieces per package
  • Recommended for use with treated lumber
  • Drives 20% faster without the need to pre-drill

HOMACER 72-in Rustic Black Interior/Exterior J-strap Barn Door Kit

(12 Reviews)
  • QUALITY 100% UNDER CONTROL - The heavy-duty hardware made with most premium carbon steel, the anti-scratch black powdered coating paint, and the wheels of the roller made with high-quality nylon for minimal noise while using on the track
  • FULLY OPTIMIZED CONNECTING WITH EXACT 16 INCHES SPACING - Track 7.5ft and under is only one piece track while Track 8ft and above are connected by two tracks using a junction plate, thus, the spacing between the middle two holes may not be 16 inches
  • BARN DOOR HARDWARE INSTALLATION MADE EASY - In our manual, you will see the step-by-step instructions with standard fractional in. measurements, self-explanatory pictures, and concise word instructions

Schlage Custom Latitude- Collins Matte Black Universal Dummy

(1 Review)
  • Elevate the style of your entire home’s interior with designer looks
  • Style updates are simple with easy, surface mounted installation – all you need is a screwdriver; package includes two non-turning handles
  • Style that changes with you - future updates take only minutes without removing the lock from the door

Architectural Mailboxes Post Mount Black Metal Extra Large Mailbox

(19 Reviews)
  • Large inner compartment accepts USPS priority mail large flat rate box 12 In. x 12 In. x 5.5 In., leaving room for additional mail and parcels
  • Heavy gauge galvanized steel body with stainless steel door pins and fully powder coated for corrosion resistance
  • Door is kept firmly closed with a sleek magnetic door closure

Metabo HPT 3-in x 0.12-in 15 Degree Bright Smooth Collated Framing Nails (2400-Per Box)

(1 Review)
  • TYPE: 15 Degree Full Round Head Smooth Shank Bright Basic Wire Coil Framing Nails
  • APPLICATION: Suitable for rough nailing of lathing and sheathing materials and provide an abundance of holding power in most wood applications
  • COUNT: 2,400 per box

Metabo HPT 1-1/4-in Ring Hot-Dipped Galvanized Collated Coil Roofing Nails

(7 Reviews)
  • TYPE: 16 Degree Full Round Head Hot Dipped Galvanized High Wire Ring Shank Wire Coil Roofing Nails
  • APPLICATION: Nail provides excellent holding power in installation of asphalt roofing shingles and insulation boards
  • COUNT: 7,200 per box

Back to Top
Product has been added to your cart