Free delivery for order over $200


In Stock

SKIL 7-in 4.2-Amp Wet Tabletop Tile Saw

16 Reviews
  • Powerful 4.2-amp motor generates 3,600-RPM (no-load speed)
  • Stainless-steel tabletop is corrosion-resistant
  • 7-in diamond blade cuts depths up to 1-3/8-in


Complete tiling projects easily with the SKIL Model 3540, 7-In Wet Tile Saw. The stainless-steel top resists corrosion and the adjustable rip fence, with miter gauge, ensures accurate straight and miter cuts.
  • Powerful 4.2-amp motor generates 3,600-RPM (no-load speed)
  • Stainless-steel tabletop is corrosion-resistant
  • 7-in diamond blade cuts depths up to 1-3/8-in
  • Table tilts, allowing 0-45 degree cuts for maximum flexibility
  • Adjustable rip fence with miter gauge ensures accurate straight and miter cuts
  • Blade cooling water reservoir keeps the blade cool and minimizes dust and debris
  • Cut capacity: 7-3/4-in rip and 7-1/4-in diagonal
Weight 18.96 lbs
Dimensions 7.52 × 15.16 × 17.32 in

Latest reviews

  1. Jd460

    We used a manual tile cutter for our backsplash in the kitchen. It worked fairly well but we wasted a lot of tile and especially with complicated outlet u shaped cuts. We bought this hoping to get the last 6 tiles cut to finish the project. I am so happy with this saws ability to cut tiles without a single bit of waste. I highly recommend for a DIY project!!! I literally cannot wait to start the next tile project since I have full confidence in this saw.

  2. Pickyourtoolswisely

    The saw worked better than expected. When using, just cut the tile with the backside facing up and you will have no problems whatsoever. The only thing I didn’t like is the appearance of the box leads me to think it was a return. There was a perfect square cut out which seemed to be a shipping label. I rated the saw based on performance, and not on the possibility of it being a return. I’m unhappy about the possibility of being sold another return by ( the first was an appliance and the delivery guy told me as he was wheeling it in) but the saw performed.

  3. Shaun

    Bought this for a kitchen backsplash DIY project to cut 3*6 marble tiles. Worked great! Easy and fast set up even for first time DIYer. Saw itself is of exceptional value. I considered renting and saw this at . The price for buying this and one day rental is basically the same. The saw rail’s alignment needs checking/ verifying after adjusting as it may not stay perfect parallel to blade after locking one bolt at one end, but this is not an issue for small job.

  4. Adyujn

    I have used this saw in the past. Old one have up after a number of years. .Best low cost tile saw in the marketplace. price on this saw was really good. Would recommend this saw for any DIY.

  5. Grammy in TN

    I have one of the larger tile saws that requires the hose connection but didn’t want to do that in cold weather. So, I decided to get this portable one and, in my opinion, it beats my larger one hands down. Just for small areas, I would recommend this saw any day. So glad I purchased this. It’s already making my job easier.

  6. Tando

    Little workhorse. Used it to redo the master bath shower. Lots of cuts. For the price and quality of the cuts, it’s impossible to beat. Would’ve been rough without it.

  7. Kyle

    I used this for backspash and couldnt be happier with how it performed for the job. Cant wait to use it for other jobs

  8. Donkey

    Motor could use a little more power, but for small jobs it worked great

  9. Brenda P

    I was going to be tiling a backsplash and a large area above my stove so I purchased this saw. This saw worked great. It is an awesome saw and just what I needed to get the job done.

  10. Krayven

    Easy to use. Had about 5o sq ft of mosiac marble tile to install for a back splash. Had to cut every sheet. This saw did the job. Was my first time using a tile saw and doing tile work.

  11. PJMc

    Saw was indispensable for installing backsplash around irregular openings and receptacles

  12. Jallen

    Bought this to complete a large thin brick job and it performed as well as wet saws used in the past that cost close to a $1000. It is cheaply made and the blade may not last mulitple jobs (material depending) but well worth it. This little booger paid for itself quickly.

  13. Joey P

    The guides on the plate are unreliable, but, once you figure that out, this saw is awesome .I was ripping 24″ tile with it and it worked great. You have to wipe out and refill the reservoir every few minutes to keep things clean, but it was worth it. I would definitely recommend for your DIY project.

  14. Jamil

    this is my second SKIL and they have always been dependable. No frills, but gets the job done.

  15. Anonymous

    was not expecting much in the way of amenities for the price. But very pleased with the cutting performance. You have to improvise for irregular cuts but again expected that. All the constructive reviews were helpful. A good little DIYer for the price.

  16. Marg

    This wet saw worked great on 2” by 4” porcelain mosaic marble for my kitchen backsplash. Only problem was inability to initially secure the top guard. Gorilla glue solved this for a while…

Write a review
Write a review

Your email address will not be published. Required fields are marked *


o3waterworks o3waterworks Ozone Enhanced Oxygen Spray Bottle

(7 Reviews)
  • Instantly generates aqueous ozone, a proven sanitizer, using only tap water- simply spray it to conveniently clean, deodorize and sanitize any surface that can get wet
  • Ultimate surface cleaner for kitchen and bathroom, pacifiers, and baby toys, can extend the life of foods in refrigerator
  • Shown to achieve a 99.9% reduction of a commercial testing surrogate for the Human Coronavirus SARS-CoV-2, and other bacteria and viruses (see 'Warranty Guide')

CRAFTSMAN 2000 Series 26-in W x 19.75-in H 5-Drawer Steel Tool Chest (Red)

(47 Reviews)
  • Proudly Made in the USA with Global Materials in Sedalia, Missouri
  • BUILT TO LAST: 18-20 gauge double wall construction
  • FULL EXTENSION DRAWER SLIDES: Support 75-lbs of product

WORX Power Share 20-volt / 20 Lithium Ion (li-ion) Air Inflator (Power Source: Battery)

(10 Reviews)
  • [HIGH-PRESSURE INFLATION] Provides up to 150 PSI, perfect for inflating tires, sports balls and other small inflatables
  • [DIGITAL LED GAUGE] Displays accurate tire pressure with the ability to preset desired PSI
  • [SHARE BATTERIES, SAVE MONEY] Worx Power Share is compatible with all Worx 20V and 40V tools, outdoor power and lifestyle products

CRAFTSMAN 8-Gallons 3.5-HP Corded Wet/Dry Shop Vacuum with Accessories Included

(24 Reviews)
  • 8 Gallon rugged polypropylene tank
  • Powerful 3.5 peak HP† motor
  • Complete vacuum organization with on-board hose, cord and accessory storage

DEWALT Auto Darkening Variable Shade Yellow Welding Helmet

(0 Reviews)
  • LIGHTNING FAST - 4 lightning fast arc sensors engage and darken the filter in 1/15000 second
  • PANORAMIC VIEWING - Additional DIN 5 side lenses allow a wide, 20.4 square inch panoramic view while working
  • SHADE CONTROL - Independent shade control allows you to fine-tune the DIN level according to preference or welding process

SKIL PWR CORE 20 5 Amp-Hour; Lithium Power Tool Battery

(5 Reviews)
  • LONGER RUN TIME AND BATTERY LIFE - The PWR CORE 20™ Lithium Battery has an innovative temperature management system to keep the battery cool and powering on through your project
  • ALWAYS KNOW CHARGE STATUS - Green LEDs show status, so you always know how much charge is left
  • POWER UP 20V TOOLS - Pairs with any SKIL 20V product

Kobalt Eva Foam 5pc Tool Storage Drawer Liner

(3 Reviews)
  • EVA foam tray inserts help organize your tools by drive size and tool type
  • Fitted cutouts help hold your tools in place
  • Contrasting colors help identify missing tools in a quick glance and printed markings indicate which tool belongs in each opening

Back to Top
Product has been added to your cart