Free delivery for order over $200


In Stock

WEN 4.3-Amp Benchtop Sander

10 Reviews
  • Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
  • Belt tilts anywhere from 0 to 90 degrees
  • Sturdy cast iron base prevents any heavy vibrations


Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.
  • Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
  • Belt tilts anywhere from 0 to 90 degrees
  • Sturdy cast iron base prevents any heavy vibrations
  • 4.3 Amp motor provides up to 3600 RPM
  • Tension release lever provides for simple changes between sandpaper grits
Weight 41 lbs
Dimensions 22.25 × 11 × 12.5 in

Latest reviews

  1. Hobby craft

    Works great great quality for the price. This was the second item that was shipped the first one came damaged from FedEx so I had to take it back to Lowe’s get a refund and order a second since it was an online order. Other than that pain I’m very pleased.

  2. DaveS

    Woodworking is a hobby for me and this is an excellent addition to my shop. I have used it for about a week and it does exactly what I was hoping it would do, straighten edges, sand/create shapes, and round edges. The table can be used with both the disk and the belt. I installed a lock washer on the knob that tightens the table. I only stalled the belt once or twice but that was my fault, I was pushing hard…..and besides the sand paper and machine are to do the hard work not me. 🙂 I’d recommend the sand paper “eraser” to keep the paper clean and sanding well.


    I had wanted a sander for quite awhile. I looked at lots of models. Some were to light and others were to big and expensive. My requirements were that I wanted a iron base, vacuum connection and adequate Power. This sander covered all the bases! I bought a HF stand and mounted it with an added base and shelf. A word of Caution this sander has some power. So with an 80 Grit disc and belt on soft wood you will make sawdust quickly. For soft wood I would add a 120 or 150 belt & disc.

  4. Jimbo

    Most surprised at the quality of this machine for the money, I Had needed a bench belt sander and had read several reviews, so got a WEN one,

    Went together fine and have used it for couple hours now. And it performs well, true you can bog the belt down if you are too heavy handed so ease up and the 80 grit belt soon speeds up again!!

    Tracking screw is quite sensitive so run the belt when adjusting and use SMALL adjustments.
    Pleasantly surprised how quietly it runs

    I am well pleased, time will tell!!

  5. BobG

    Drive belt came off within 30 minutes. Had boxed up for return, but watched a youtube video on how to fix. Simple, and has been fine since. Wen/Mfr QC should have caught it though.

  6. Matt

    I have my own business working with wood, and I use this tool everyday. Its quiet, and super useful. I love it.

  7. SkippersWorkshop

    My 20 year old Delta finally gave out after much use, so I had to replace it. I LOVE my WEN benchtop jig saw, so I went with the Wen. It is a bit light weight, so it can move on you, but all in all it’s not bad for an el cheapo.

  8. Justin

    This is a pretty well rounded bench sander. The disc is a beast. Just wish it had alittle more power on the belt drive. Definitely worth what I paid. Learned to make due.

  9. Anonymous

    Big Advantage: The disc sander on the side does not stick up above the level of the belt sander.

  10. Wastedwood

    Good product was rated well and all the review areas so that’s why I bought it, I also got it from as they had the published best delivery time, but of course they didn’t make that, it was about a week later than what they had published it would arrive, so not happy about that part. Their cost same everybody else is on this was exactly the same but it is a good sander replaces my Craftsman which was difficult to change the belts on and this is quite easy

Write a review
Write a review

Your email address will not be published. Required fields are marked *


o3waterworks o3waterworks Ozone Enhanced Oxygen Spray Bottle

(7 Reviews)
  • Instantly generates aqueous ozone, a proven sanitizer, using only tap water- simply spray it to conveniently clean, deodorize and sanitize any surface that can get wet
  • Ultimate surface cleaner for kitchen and bathroom, pacifiers, and baby toys, can extend the life of foods in refrigerator
  • Shown to achieve a 99.9% reduction of a commercial testing surrogate for the Human Coronavirus SARS-CoV-2, and other bacteria and viruses (see 'Warranty Guide')

CRAFTSMAN 2000 Series 26-in W x 19.75-in H 5-Drawer Steel Tool Chest (Red)

(47 Reviews)
  • Proudly Made in the USA with Global Materials in Sedalia, Missouri
  • BUILT TO LAST: 18-20 gauge double wall construction
  • FULL EXTENSION DRAWER SLIDES: Support 75-lbs of product

WORX Power Share 20-volt / 20 Lithium Ion (li-ion) Air Inflator (Power Source: Battery)

(10 Reviews)
  • [HIGH-PRESSURE INFLATION] Provides up to 150 PSI, perfect for inflating tires, sports balls and other small inflatables
  • [DIGITAL LED GAUGE] Displays accurate tire pressure with the ability to preset desired PSI
  • [SHARE BATTERIES, SAVE MONEY] Worx Power Share is compatible with all Worx 20V and 40V tools, outdoor power and lifestyle products

CRAFTSMAN 8-Gallons 3.5-HP Corded Wet/Dry Shop Vacuum with Accessories Included

(24 Reviews)
  • 8 Gallon rugged polypropylene tank
  • Powerful 3.5 peak HP† motor
  • Complete vacuum organization with on-board hose, cord and accessory storage

DEWALT Auto Darkening Variable Shade Yellow Welding Helmet

(0 Reviews)
  • LIGHTNING FAST - 4 lightning fast arc sensors engage and darken the filter in 1/15000 second
  • PANORAMIC VIEWING - Additional DIN 5 side lenses allow a wide, 20.4 square inch panoramic view while working
  • SHADE CONTROL - Independent shade control allows you to fine-tune the DIN level according to preference or welding process

SKIL PWR CORE 20 5 Amp-Hour; Lithium Power Tool Battery

(5 Reviews)
  • LONGER RUN TIME AND BATTERY LIFE - The PWR CORE 20™ Lithium Battery has an innovative temperature management system to keep the battery cool and powering on through your project
  • ALWAYS KNOW CHARGE STATUS - Green LEDs show status, so you always know how much charge is left
  • POWER UP 20V TOOLS - Pairs with any SKIL 20V product

Kobalt Eva Foam 5pc Tool Storage Drawer Liner

(3 Reviews)
  • EVA foam tray inserts help organize your tools by drive size and tool type
  • Fitted cutouts help hold your tools in place
  • Contrasting colors help identify missing tools in a quick glance and printed markings indicate which tool belongs in each opening

Back to Top
Product has been added to your cart